Do you wish to enhance the ambience of your home? You can now do it with painting. It not only adds a fresh and new look to your home but also makes it vibrant. However, to retain the shine of the paint for a long time. The application of wall putty on the painted surfaces is required.
Yes, it is wall putty that adds to the long-lasting beauty of the paint. It strengthens the paint coat to increase its durability. Furthermore, prior to paint application, it is applied to get a perfect finish on the interior and exterior surfaces of your house, whether old or new. Therefore, before you start renovating your home. It is essential to have an understanding of what it is all about and why it is important for house painting.
What do you mean by wall putty?
Similar in texture to dough or clay, wall putty is a fine powder derived from white portland cement. Its composition includes superior-quality polymers and minerals. It has high plasticity and offers a safe, smooth base for paint application. Moreover, It also acts as a filler or sealer since it fills the gaps, small holes and cracks formed on the walls.
After knowing what is wall putty, let’s understand how it can prolong the paint life of our home.
How to extend the paint life of your home with wall putty?
Did you know that your walls can look uneven even after applying expensive wall paint? Yes, this is possible. The surfaces of your home painted with high-priced paint can also be affected. If there is no wall putty applied to them before starting the painting process. Problems like dampness, discoloured patches, efflorescence, peeling of old paint, pinholes, uneven. And rough cement plaster on the walls of your house can occur due to wall putty negligence.
Therefore, to resolve such issues, first identify the main problems on your wall before beginning the painting procedure. Applying wall putties like the JKCement WallMaxX from one of the top 5 wall putty brands in India. JKCement to the interior and exterior areas of your home ensures levelled, highly durable, and magnificent surfaces for all kinds of paint. Made with Abrasion Resistant Technology (ART), this white cement based putty provides a protective layer to the painted surfaces for resistance against efflorescence, abrasion, cracks and crevices buildup.
To ensure the overall safety of your painted walls and increase their durability. Here is a step-by-step guide to correctly apply wall putty on the surfaces mentioned below:
Steps for wall putty application
- Before wall putty is applied, make sure to clean the surface thoroughly and let it dry. There should be no loose particles or dust present on the surface. If found, remove them with a wire brush or sandpaper.
- As per the manufacturer’s instructions, blend it with water in a pan consistently with an electric putty mixer or by hand for 10-15 minutes, till it transforms into a paste-like consistency.
- Although using a primer before putty is not recommended, you can still apply one coat of it in a bottom-to-top manner with a spatula or a putty knife. Let the surface dry for 6 to 8 hours.
- After the first coat of white cement based putty, apply a second coat and let the surface completely dry. Once it has fully dried, use sandpaper to eliminate any unevenness from the surface.
To wrap it up, wall putty is an integral element for setting up an ideal base for cement plastered ceilings and walls. It not only extends the paint’s covering capacity but also provides water-resistance quality. Moreover, It also saves you the cost of painting as it reduces its overall consumption and prolongs the paint life of your home.
